Addam’s Family by Bally (High End Restoration)

$17,999.00

We will collect a 50% deposit to begin restoring a machine and it takes 3-4 months to complete.

High End Restoration Process:

  • Remove everything from Playfield and Cabinet
  • Tumble and polish all hardware
  • Sand off old cabinet artwork to bare wood
  • Bondo and repair cabinet (several times)
  • Tape off inside bottom of cabinet and paint whole cabinet
  • Prep cabinet surface for decals
  • Install decals and trim off excess
  • Set cabinet up on legs for reassembly
  • Install brand new ground braid
  • Disassemble power box and transformer, clean, paint and reassemble
  • Install new button(s), flipper button switches, new coindoor, new siderails, new lockdown bar receiver, new head head hinges, new bolts/nuts
  • Install head on cabinet
  • Disassemble backbox light board, clean harness, paint light board, and reassemble
  • Disassemble board panel, paint, rebuild and clean all boards, and reassemble
  • Disassemble speaker panel, clean/paint, install new DMD, new speaker panel plastic, reinstall in head.
  • Install cabinet harness (cleaned)

 

    Playfield Work:

 

  • Install all new tnuts in new/clearcoated playfield by hand
  • Paint and install wooden siderails
  • Install all new pop bumper parts, playfield support rails, playfield hangers
  • Disassemble all playfield assemblies, tumble all brackets and hardware, clean all coils and install new coil wrappers, brand new plungers, coil sleeves, etc.
  • Install completed assemblies on playfield
  • Install tumbled/polished posts, rubbers
  • Clean and regrain all ball guides
  • Clean all lamp boards and install LED’s
  • Disassemble all playfield plastics and install new plastic set
  • Disassemble ramp(s), clean harnesses, polish hardware, replace switches, reassemble on brand new ramp
  • Clean all wiring harnesses by hand, let dry, reinstall on playfield
  • Reinstall playfield in cabinet and make any necessary adjustments